Address
304 North Cardinal St.
Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Local Time:
--:--
Request a Quote →
YUTO TAPE
JPMorgan Chase USD Invoicing
Direct Converting from Shenzhen
JPMorgan Chase USD Invoicing
Direct Converting from Shenzhen
Shenzhen Converting Hub · Genuine 3M™ Master Jumbo Rolls
Precision 3M™ Industrial Tape Converting: Custom Slitting & Die-Cutting
Direct converting from Shenzhen, China. We slit master jumbo rolls to widths from 3mm to 584mm and die-cut complex gaskets for electronics, EV battery packs, and precision hardware.
20 Core SKUs
Genuine 3M™ Master Rolls
Per drawing
Slit / Die-Cut Tolerance
1–2 days
DFM Review & Reply
1 Roll
Low MOQ Slitting
Converting Capabilities
Two Ways We Convert 3M™ Materials
Whether you need non-standard widths for your assembly line or complex geometric gaskets cut from CAD files, we provide rapid turnkey conversion directly from Shenzhen.
Service 01 · Millimetric Precision
Custom Width Slitting
Jumbo Roll to Precise Millimetric Coils
We slit factory 3M master rolls into custom widths from 3mm up to 584mm. Rewound onto 1-inch or 3-inch plastic or fiber cores with computerized tension control to prevent edge curling or adhesive oozing.
- Width range: 3mm – 584mm (tolerance confirmed per drawing)
- Dust-controlled slitting for electronic-grade tapes
- Custom roll lengths & release liner rewinding
- Low MOQ: 1 finished slit roll
Service 02 · CAD Tooling & Kiss-Cut
Precision Die-Cutting & Stamping
Engineered Gaskets, Shims & Insulators
Steel-rule, rotary, and kiss-cutting for thermal pads, EMI shielding foils, Kapton® insulators, and VHB™ structural gaskets according to your CAD drawings (.DXF / .STEP / .PDF). Custom die-cut geometries require dedicated tooling; tooling cost and lead time are quoted with your RFQ.
- Complex 2D geometric shapes & custom pull-tabs
- Kiss-cut on rolls or individual sheets
- Multi-layer adhesive and liner lamination
- Rapid prototype sample turnaround for engineering verification
Interactive Converting Visualizer
Precision Slitting Yield & Tolerance Simulator
Select or enter your required tape width to calculate master jumbo roll yield, custom core sizing, and millimetric slitting tolerances.
Standard Width Presets:
12.7 mm [±0.30]
CHUCK A
CHUCK B
DATUM A (0.00 mm)
3M™ MASTER JUMBO ROLL · WIDTH CONFIRMED PER SKU
DATUM B (584.00 mm)
CH-01 // YIELD
● LIVE
~45–46 Coils
Estimated Output Yield:
Material Yield: {eff}% · Edge Trim: {loss}mm
CH-02 // TOLERANCE
PRECISION
Per drawing
Slitting Tolerance:
Circular Shear Knife · Clean Edge
CH-03 // CORE SPEC
STANDARDIZED
1" / 3" Core
Core Specifications:
PE Plastic / Kraft Paper
CORE IMPRINT
CH-04 // PRODUCTION
RAPID MTO
1 Roll
Minimum Order Quantity:
Sample from 1 roll · Dispatch confirmed at RFQ
Why Work With Yuto
Engineered Reliability. Converter Agility.
We shorten the gap between long distributor lead times and the flexibility that small production runs require.
Genuine 3M™ Master Rolls
Raw stock is sourced through established 3M distribution channels with verifiable lot numbers and technical datasheets. COA is confirmed per lot at RFQ.
Low MOQ & Fast Turnaround
Slitting from 1 roll, die-cutting prototypes from 200 pcs. Key SKUs stocked at our partner converting facility in Shenzhen for rapid fabrication and global air express dispatch.
DFM & Application Engineering
Send us your CAD drawings or explain your bonding substrates. Our team validates liner release, die clearances, and thermal/dielectric requirements before cutting.
Inventory & Specifications
Interactive Materials Directory
20 core industrial-grade 3M™ SKUs available for conversion from Shenzhen. Need another 3M model? Specify it in your RFQ. Filter by category, inspect key engineering specifications, and pre-fill your RFQ with one click.
Showing 20 of 20 materials
3M™ 1181
● Available
Copper Foil EMI Shielding Tape
Copper Foil / EMI
1.4 mil smooth copper foil backing · Conductive acrylic adhesive · Excellent shielding attenuation and solderability.
3M™ 1182
● Available
Double-Coated Conductive Copper Foil
Copper Foil / Conductive
Conductive acrylic adhesive on both sides · Ideal for grounding flex circuits and bonding EMI gaskets.
3M™ 1183
● Available
Tin-Plated Copper Foil Tape
Tin-Plated Foil / EMI
Tin-plated copper backing for superior oxidation resistance and easy soldering · Conductive acrylic adhesive.
3M™ 1245
● Available
Embossed Copper Foil Tape
Embossed Foil / Contact
Embossed pattern cuts through non-conductive adhesive layer to establish direct metal contact with substrate.
3M™ 1170
● Available
Aluminum Foil EMI Shielding Tape
Aluminum Foil / Thermal
Conductive acrylic adhesive · Excellent heat dissipation and EMI shielding · Flame retardant to UL510.
3M™ 92
● Available
Polyimide (Kapton®) Electrical Tape
Polyimide / High-Temp
Class H (180°C) continuous · 0.07mm thickness · Thermosetting silicone adhesive for wave solder & SMT masking.
3M™ 98C-1
● Available
Polyimide Battery Insulation Tape
Polyimide / Battery
Specialized high-temperature polyimide film engineered for EV battery pack insulation and cell wrapping.
3M™ 7413D
● Available
Double-Coated Polyimide Tape
Polyimide / Double-Sided
Amber polyimide film coated on both sides with high-temperature silicone adhesive. Excellent dimensional stability.
3M™ 1350F-1Y
● Available
Flame-Retardant Polyester Film Tape (Yellow)
Electrical Film / 5kV
Yellow 1-mil polyester film with thermosetting rubber adhesive · Rated 5kV dielectric breakdown, UL510 flame retardant.
3M™ 1350F-1
● Available
Polyester Film Electrical Tape (White)
Electrical Film / Class B
White 1-mil polyester backing with flame-retardant acrylic adhesive · Excellent dielectric strength and solvent resistance.
3M™ 1350F-1B
● Available
Black Opaque PET Electrical Tape
Opaque PET / Shading
Black 1-mil opaque polyester film for 100% optical light blocking, high dielectric strength, and residue-free removal.
3M™ 1350F-2B
● Available
Black Polyester Film Tape (2-mil)
Heavy-Duty Electrical Film
Heavy-duty 2-mil black polyester film for enhanced mechanical puncture resistance and high dielectric insulation.
3M™ 1558T
● Available
Black Acetate Cloth Electrical Tape
Acetate Cloth / Flexible
Flexible black acetate cloth backing with thermosetting rubber adhesive · Highly conformable, absorbs varnishes and resins.
3M™ 44
● Available
Composite Film Electrical Insulating Tape
Composite Film / Low Halogen
Polyester film/mat composite with thermosetting rubber adhesive · High puncture resistance, absorbs insulating varnishes.
3M™ 69
● Available
Glass Cloth Electrical Tape
Glass Cloth / Class H 200°C
Woven glass cloth backing with high-temp thermosetting silicone adhesive · Rated up to 200°C continuous, high mechanical tensile strength.
3M™ 467MP
● Available
200MP Adhesive Transfer Tape
Transfer Tape / 200MP
2.0 mil pure acrylic adhesive transfer film (no carrier) · Outstanding shear strength, solvent and temperature resistance.
3M™ 9448A
● Available
Double-Coated Tissue Tape
Double-Coated / Tissue
Medium-firm acrylic adhesive on lightweight tissue carrier · Excellent initial tack, easy to die-cut and laminate to foam & rubber.
3M™ 9495MP
● Available
200MP Double-Coated PET Tape
Double-Coated / PET
Clear polyester carrier with 3M 200MP high-performance acrylic adhesive on both sides · Superior dimensional stability during die-cutting.
3M™ 93015LE
● Available
300LSE Low Surface Energy Tape
Double-Coated / 300LSE
High-strength acrylic adhesive 300LSE on thin polyester carrier · Bonds aggressively to polypropylene (PP), polyethylene (PE), and powder coats.
3M™ Super33plus
● Available
Scotch® Super 33+ Vinyl Electrical Tape
Vinyl Electrical / All-Weather
Premium 7-mil all-weather vinyl electrical tape · Elastic PVC backing with aggressive rubber resin adhesive. Conforms from -18°C to 105°C.
Facility & Quality Control
Inside Our Shenzhen Converting Partner
Sourced through established 3M distribution channels. Dust-controlled converting, computerized tension control, and lot-by-lot inspection.
Traceable Materials & Converting Equipment
Every single roll and die-cut component converted by YUTO is cut from factory-sealed 3M master rolls maintained at our partner's temperature- and humidity-controlled converting facility in Shenzhen.
- Dust-controlled slitting for particulate-sensitive electronics
- High-precision rotary and flatbed die-cutting stations with optical CCD registration
- Complete batch traceability with 3M manufacturer lot numbers on every box
- In-house micrometer, peel-adhesion, and tensile testing verification
High-Precision Slitting Line
Warehouse Aisle & Material Handling
Temperature-Controlled 3M Master Roll Storage
Custom Slit Rolls Packaged for Export Delivery
Batch-traceable 3M material — lot numbers and COA available upon request
Quality & Material Traceability Assurance
Genuine 3M Material
Sourced through established 3M distribution channels
Batch-Level Traceability
Lot numbers recorded on every shipment
COA on Request
COA available on request — confirmed per lot at RFQ
Incoming material check · Genuine master roll sourcing · Export-grade protective packing
How We Work
4-Step Precision Conversion Workflow
From drawing to custom components delivered to your assembly facility.
STEP 01
Submit Drawing / Specs
Send your 2D CAD files (.DXF/.DWG/.PDF) or specify roll width, length, and 3M SKU number.
STEP 02
DFM Review & Quote
Our technical team reviews tolerances, tooling requirements, and material compatibility, then confirms unit price and lead time with your quotation.
STEP 03
Precision Conversion
Slitting or die-cutting under tension and dust-controlled environment with optical lot inspection.
STEP 04
Global Express Delivery
Secure export packing with lot COA documentation, dispatched via DHL/FedEx/UPS directly from Shenzhen.
Engineering Inquiry
Request a Formal Quotation
Upload your drawing or tell us your tape specifications. We reply to every technical inquiry within 1–2 business days (Monday–Friday).
Not sure which tape fits, or need a 3M part number not listed above? Describe the two surfaces, working temperature, or required model — we'll confirm material availability and quote your slit roll or die-cut part.
Engineering RFQ Submission
All technical files and trade specifications are strictly confidential under commercial NDA.
1–2 Business Day Response
Every drawing is reviewed for tolerance feasibility and material compatibility before we quote. Tooling and setup costs are quoted separately.
Supported Drawing Formats
Accepted CAD formats: .DXF, .DWG, .STEP, .STP, .PDF (up to 10MB per upload). Include critical dimensions and material notes in your drawing.
Global Payment & Settlement
Direct corporate USD settlement via JPMorgan Chase Bank, N.A. New York Branch:
· Bank: JPMorgan Chase Bank, N.A. New York Branch
· Currency: USD | Methods: ACH · Wire · SWIFT · PingPong
· Entity: Shenzhen Yutuo E-commerce Co., Ltd.
· Currency: USD | Methods: ACH · Wire · SWIFT · PingPong
· Entity: Shenzhen Yutuo E-commerce Co., Ltd.
USD payments via JPMorgan Chase (New York) — supporting ACH, Wire, and SWIFT. We also accept PingPong B2B settlement. Full remittance details are issued on your signed proforma invoice (PI).
Payment security: We never change our bank details by email. Verify any change by phone or video before transferring. Official remittance details appear only on our signed proforma invoice.
Direct Engineering Contact
Email: [email protected]
Location: Shenzhen, Guangdong, China
Frequently Asked Questions
Common Converting Questions
Everything you need to know about order minimums, tooling, material traceability, and international shipping.
Are you an official 3M subsidiary or an independent converter?
We are an independent precision converter based in Shenzhen, China. We source authentic 3M™ master rolls through established distribution channels and provide custom slitting, laminating, and die-cutting fabrication according to client engineering drawings.
What is your Minimum Order Quantity (MOQ)?
For custom-width slitting, the minimum is one finished slit roll, cut from a 3M master roll. For die-cut parts, prototype runs start at 200 pieces, depending on part size and tooling complexity.
Can you provide 3M Certificate of Analysis (COA) and material traceability?
Yes — master rolls are sourced through established 3M distribution channels, and every shipment carries the manufacturer lot number. Tell us which documents you need (COA, RoHS/REACH) in your RFQ and we will confirm what is available for that lot before you order.
What CAD file formats do you accept for die-cut inquiries?
We accept .DXF, .DWG, .STEP, .STP, and vector .PDF files. Please ensure critical tolerances, adhesive side orientation, and liner pull-tab specifications are indicated on your drawing.
What are your international payment terms and supported currencies?
Our primary settlement currency is USD, accepted via corporate wire transfer (Fedwire / SWIFT) and ACH payments directly into our JPMorgan Chase Bank corporate account in New York, as well as B2B clearing via PingPong Global Payment. If you require settlement in other major currencies (such as EUR, GBP, SGD, or HKD) or special payment arrangements (which may incur intermediary exchange fees and additional clearing time), please consult with our sales engineering team in advance prior to order placement.
How fast can you ship prototype samples and production orders?
Slit tape orders from current stock are typically dispatched within 2–4 business days. Die-cut parts that require new tooling usually take 5–7 business days. Lead times are confirmed with your quotation; we ship worldwide via DHL, FedEx, and UPS Express.
Supply Chain & Business Model
We're a Converter, Not a Mill.
Yuto works with an established precision converting partner in Shenzhen. Master rolls are stocked at our partner facility; we handle engineering review, take the order, and ship direct. One contact, one invoice, one shipment.